Commercial Roofing in Murfreesboro, TN
Flat roof leaking? Need a full TPO or EPDM replacement? We work with property owners and managers across Murfreesboro and Middle Tennessee, licensed and insured, with written quotes before any work begins.
Commercial Roofing Services in Murfreesboro, TN

Veteran-Owned And Operated
Roof Troops is a veteran-owned roofing company based in Murfreesboro. We handle full roof replacements on residential homes, and we do it with manufacturer-certified materials and a written quote before any work starts.

What Our Commercial Roofing Work Covers
Every commercial job begins the same way: we walk the roof, photograph the system, and give you a plain-English read on what we found and what it will cost to fix it. You receive a detailed written quote before any work starts, and if anything underneath changes the scope, we call you before we touch it.
Here is the full scope of our commercial roofing services:
Full Commercial Roof System Replacement
We tear off the old membrane, inspect the decking for soft spots and moisture damage, and install a new system suited to your building's structure and slope. You get a detailed written estimate before work starts, and scope changes get a phone call from us first.
Targeted Flat Roof Leak Repair
We locate the actual source of the leak, not just where water is showing up inside, and repair the seam failure, penetration, or membrane break that caused it. Every repair is photographed and documented so you have a record for your building file and your insurer.
Commercial Roof Inspection And Condition Report
Whether you're buying a property, managing a portfolio, or responding to a weather event, we inspect the full system and deliver a written report with photos. If the roof is sound, we tell you it's sound and you owe us nothing for the assessment.
Storm Damage Assessment and Documentation
We photograph the hail strikes, seam lifts, and membrane damage in the format adjusters need, and can meet your adjuster on-site to walk through what we documented.
Roof Drain Clearing And Preventive Maintenance
Blocked drains cause ponding water, which accelerates membrane failure faster than almost anything else on a flat roof. We clear drains, reseat loose seams, and check flashings around HVAC curbs and vents before small issues become replacement-level damage.
When to Call a Commercial Roofer


Roof Inspection And Assessment
We walk the full roof surface, inspect the membrane, deck, flashings, penetrations, and drainage, and photograph everything we find. You receive a plain-English condition report with photos, not just a price.

Written Estimate Before Any Work
The scope and price are in writing before a crew arrives. That number is the final invoice unless something changes underneath, and changes get a phone call from us before they happen.

Scheduling Around Your Operations
We plan the job around your business hours and tenant situation as much as the work allows. Larger tear-offs require staging and generate noise, and we walk through the realistic timeline with you before scheduling.

Installation, Tear-Off, And Site Cleanup
Our crew handles removal of the old system, deck repair where needed, and full installation of the new membrane or repair scope. We clean the site when we leave.

Final Walkthrough And Warranty Documentation
We walk the finished roof with you, show you the work, and hand over documentation for your building records. Manufacturer warranties through our GAF, CertainTeed, Owens Corning, Tamko, and Malarkey certifications are documented at this stage, along with our lifetime workmanship warranty.
How Commercial Roofing Works With Roof Troops

Commercial Roofing Systems We Install
The right membrane for your building depends on slope, existing substrate, roof traffic, and how the building handles heat load across Middle Tennessee’s summers. We install the systems most common on commercial buildings in this region and can walk you through the trade-offs for your specific structure before you commit to a material. We do not recommend the most expensive option by default, and we do not push a system that is wrong for the building. Our goal is a roof that performs for its full service life without requiring avoidable callbacks. These are the systems we install:
TPO Single-Ply Membrane Installation
TPO is a heat-welded, single-ply membrane that reflects solar heat and handles the temperature swings common in Middle Tennessee summers without degrading the seams. It is the most commonly specified system on new commercial construction in this region for good reason.
EPDM Rubber Roofing System Installation
EPDM is a proven rubber membrane with a long service record on commercial buildings across a wide range of climates and roof configurations. It handles UV exposure and temperature cycling well and is one of the more straightforward systems to repair when isolated damage occurs.
Modified Bitumen Roof System Installation
Modified bitumen is a reinforced asphalt system installed in multiple layers, which gives it more redundancy than single-ply membranes on roofs that see regular foot traffic or equipment access. It suits low-slope structures that need a more robust membrane than a single-ply system provides.
Flat and Low-Slope Asphalt System Installation
Older commercial buildings sometimes require an asphalt-based flat system to match existing conditions or structural requirements rather than convert to a single-ply membrane. We assess the substrate and recommend the appropriate system for the building as it stands.
Roof Deck Repair And Substrate Preparation
A new membrane installed over a compromised deck will fail early regardless of material quality, which is why we inspect and repair the deck before any new system goes down. Soft boards, wet insulation, and moisture-damaged substrate are replaced before installation begins.
What Affects Commercial Roof Cost in Murfreesboro

Commercial roofing is priced per square foot, and the range across jobs is wide because the variables underneath each building are different. A building with a clean deck, minimal penetrations, and easy staging access costs considerably less to re-roof than one with damaged substrate, a dense HVAC layout, and a congested lot. We do not quote until we have walked the roof and seen what is actually there, because a number without an inspection is not a real number. What we find on the roof shapes the estimate, and you get the estimate in writing before any work starts. These are the factors that move the cost most significantly:
Roof square footage and total area:Â Commercial roofing is priced by the square foot, so total roof area is the single largest cost driver on any job. Larger buildings cost more to re-roof; that part of the estimate is straightforward.
Deck condition and repair requirements:Â If the decking beneath the membrane is soft, wet, or structurally compromised, it must be repaired before a new system goes down. Deck work adds labor and material cost, and we identify it during the inspection so it is in the quote before we start.
Roofing system and membrane type selected:Â TPO, EPDM, and modified bitumen carry different material costs per square foot, and those differences compound across a large roof. We quote each system separately so you can make an informed decision on the material before committing.
Penetration count and flashing complexity:Â Every HVAC curb, drain, skylight, pipe boot, and rooftop unit requires precise flashing work to maintain a watertight seal at the penetration. Buildings with a dense mechanical layout take more time and more material than roofs with minimal penetrations.
Site access and staging logistics:Â A building with open perimeter access is faster and less expensive to work on than one in a congested commercial lot where staging a dumpster and materials requires coordination. We account for access in the estimate so there are no job-day surprises.
Why Murfreesboro Businesses Work With Us

Commercial Roofing Questions We Hear Often
Do you work on commercial and residential properties?
Yes. We handle both residential and commercial roofing across Murfreesboro and Middle Tennessee, and the two are managed as distinct services with separate systems, materials, and processes. If you manage a mixed-use property or need both services, we can assess the full scope.
What commercial roof systems do you install?
We install TPO, EPDM, modified bitumen, and flat low-slope asphalt systems on commercial buildings. If you are not certain what system is currently on your building, we identify it during the inspection and explain the options for replacement or repair.
Can you work while my business stays open?
Usually yes. We schedule around your operations and tenant situation, and we walk through the realistic day-by-day timeline with you before work begins. Large tear-off jobs generate noise and require dumpster staging, and we plan around that with you in advance.
Can you document storm damage for a commercial insurance claim?
How long does a commercial roof replacement take?
What warranties apply to a commercial installation?
Manufacturer warranties apply through our GAF, CertainTeed, Owens Corning, Tamko, and Malarkey certifications and cover the roofing system itself. Our lifetime workmanship warranty covers installation labor. Both are documented in writing before the job starts.
What area do you serve for commercial work?
We cover all of Middle Tennessee for commercial roofing, including Rutherford, Davidson, and Williamson counties and the cities and towns throughout those areas. Murfreesboro is our base of operations, and most commercial jobs in this region fall within our normal service range.
Proudly Serving Murfreesboro & Nearby Cities
Antioch, TN
Brentwood, TN
Christiana, TN
Eagleville, TN
Franklin, TN
La Vergne, TN
Lascassas, TN
Manchester, TN
Murfreesboro, TN